Kopzon, Vadim and Hahnel, Sebastian and Broll, Alexander and Fuellerer, Julian and Beierlein, Georg and Rosentritt, Martin (2025) In-vitro study of the implant bed cooling during guided implantation using an additively manufactured drilling template with an integrated cooling system. INTERNATIONAL JOURNAL OF IMPLANT DENTISTRY, 11 (1): 22. ISSN , 2198-4034
Full text not available from this repository. (Request a copy)Abstract
Purpose The aim of this study was to investigate the performance of a novel 3D-printed cooling system for drilling templates during fully guided implant insertion. Methods Dental implant tunnel preparations were performed for the Straumann Bone Level implant in a 3D-printed synthetic resin model using either conventional guided or modified 3D-printed guided (with a cooling channel leading directly to the implantation site) drilling templates. Temperature measurements were performed with and without cooling at drill depths of 2, 4, 7, and 10 mm. Results For all drill depths and templates, cooling had a statistically significant (p < 0.001) influence on the measured mean temperature. ANOVA and Bonferroni correction revealed that there was a statistically significant (p < 0.001) difference in the cooling efficiency of the samples cooled with all the templates in comparison with that of the samples not cooled. The maximum temperature measured with the conventional template was 35.2 degrees without cooling and 26.6 degrees C with cooling at depths of 2 and 10 mm, respectively. For the modified template, the maximum temperature reached 39.1 degrees C without cooling and 31.2 degrees C with cooling at depths of 10 and 2 mm, respectively. Conclusions Compared with the conventional cooling system, the newly developed internal cooling channel of the modified drill template did not lead to a better cooling effect.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | BONE; TEMPERATURE; ACCURACY; HEAT; Bone heating; Dental implant; Drill cooling; Printed template; Guided template |
| Subjects: | 600 Technology > 610 Medical sciences Medicine |
| Divisions: | Medicine > Lehrstuhl für Zahnärztliche Prothetik |
| Depositing User: | Dr. Gernot Deinzer |
| Date Deposited: | 08 Sep 2026 08:43 |
| Last Modified: | 08 Sep 2026 08:43 |
| URI: | https://pred.uni-regensburg.de/id/eprint/66315 |
Actions (login required)
 |
View Item |
