Arain, Sarina and Weiss, S. and Heinzle, E. and John, G. T. and Krause, C. and Klimant, Ingo (2005) Gas sensing in microplates with optodes: Influence of oxygen exchange between sample, air, and plate material. BIOTECHNOLOGY AND BIOENGINEERING, 90 (3). pp. 271-280. ISSN 0006-3592, 1097-0290
Full text not available from this repository. (Request a copy)Abstract
Microplates with integrated optical oxygen sensors are a new tool to study metabolic rates and enzyme activities. Precise measurements are possible only if oxygen exchange between the sample and the environment is known. In this study we quantify gas exchange in plastic microplates. Dissolved oxygen was detected using either an oxygen-sensitive film fixed at the bottom of each well or a needle-type sensor. The diffusion of oxygen into wells sealed with different foils, paraffin oil, and paraffin wax, respectively, was quantified. Although foil covers showed the lowest oxygen permeability, they include an inevitable gas phase between sample and sealing and are difficult to manage. The use of oil was found to be critical due to the extensive shaking caused by movement of the plates during measurements in microplate readers. Thus, paraffin wax was the choice material because it avoids convection of the sample and is easy to handle. Furthermore, without shaking, significant gradients in pO(2) levels within a single well of a polystyrene microplate covered with paraffin oil were detected with the needle-type sensor. Higher O-P(2) levels were obtained near the surface of the sample as well as near the wall of the well. A significant diffusion of oxygen through the plastic plate material was found using plates based on polystyrene. Thus, the location of a sensor element within the well has an effect on the measured O-P(2) level. Using a sensor film fixed on the bottom of a well or using a dissolved pO(2)-sensitive indicator results in pO(2) offset and in apparently lower respiration rates or enzyme activities. Oxygen diffusion through a polystyrene microplate was simulated for measurements without convection-that is, for samples without oxygen diffusion through the cover and for unshaken measurements using permeable sealings. This mathematical model allows for calculation of the correct kinetic parameters. (c) 2005 Wiley Periodicals, Inc.
| Item Type: | Article |
|---|---|
| Uncontrolled Keywords: | GLUCOSE OXIDASE; PH INDICATORS; ASSAYS; optical oxygen sensor; oxygen transfer; optode; microplate sealing |
| Subjects: | 500 Science > 540 Chemistry & allied sciences |
| Divisions: | Chemistry and Pharmacy > Institut für Analytische Chemie, Chemo- und Biosensorik |
| Depositing User: | Dr. Gernot Deinzer |
| Date Deposited: | 14 May 2021 04:56 |
| Last Modified: | 14 May 2021 04:56 |
| URI: | https://pred.uni-regensburg.de/id/eprint/36138 |
Actions (login required)
 |
View Item |
